Richey wrote:
I've been asked if this will work. I would think that it would but I would
like a second opinion.
7206 VXR with an NPE-400, 512Mb ram, C7200 I/O 2FE/E card and two
PA-MC-T3s. The PA-MC-T3s are 90 Bandwidth points each and the I/O
controller counts as 400. There would be some MLPPP Bundles and some basic
QOS. The only ACLs in the box would be to protect the box it's self and the
occasional SMTP block for a user that won't clean up their network.
We have several of this exact setup as customer T1 aggregation routers
with no issues. We're using OSPF for the infrastructure and iBGP for
customer routes. NPE300 will even work as long as you don't have a
large percentage of the T1s as multilink. Put your PA-MC-T3s in the
even numbered slots.
--
Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
