Drew, Overruns are usually caused by the receiving hardware buffer being "flooded" for lack of a better term because the input rate exceeded the receiver's ability to handle the traffic.
Darin > From: [email protected] > To: [email protected] > Date: Thu, 5 Nov 2009 13:41:16 -0500 > Subject: [c-nsp] Gigabit Interface Input Errors > > Hi, > > I noticed I'm seeing some Input errors on a gigabit ethernet interface: > > 70 input errors, 0 CRC, 0 frame, 70 overrun, 0 ignored > > the number of input errors seems to increment along with the overrun counter > which I assume means that the actual errors are overrun errors. > > Does anyone have any tips on finding out what is causing it to overrun? > > My first inclination is to assume it is not a huge problem because of the > amount of packets that are flowing through this interface: > > 2367831951 packets input, 247924231216 bytes, 0 no buffer 70 out of > 2367831951 is a fairly small number but I wanted to check and see if you all > had any thoughts. > > thanks, > -Drew > > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _________________________________________________________________ Bing brings you maps, menus, and reviews organized in one place. http://www.bing.com/search?q=restaurants&form=MFESRP&publ=WLHMTAG&crea=TEXT_MFESRP_Local_MapsMenu_Resturants_1x1 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
