Area code - critical value - description - remote port [port-cX] Area code: [ip|sys|rf] are responsible of the end device critical value: 00 total service disruption for the customers 01 partial service disruption for the customers - some customers are working others not or the service is degraded 02 no impact in the customers (ex, pcs or internal desktops)
description: as you prefer remote port: Gi0/1/12 or G1/12 RFEC1 (RFEC = remote port-channel) example: A - 00 - Trunk to stack01 - G1/0/24 RFEC1 it works ok for us El jue, 21-05-2009 a las 10:07 -0500, Pete Templin escribió: > List, > > What do you put into your interface descriptions? Do you document > circuit ID, far-end equipment/port, near-end equipment/port, and/or > anything else? > > Pete > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
