Hi all, I am hoping to gain some insight from some of the people who have done this type of thing before. I am setting up a 24 strand fiber connection between two facilities. I will be doing GigE on 4 strands and placing the Cisco 15454 with OC48 cards on 4 strands of fibers.
What I need to do is be able to cross connects circuits at the DS1, DS3 and OCn level between the two facilities. Below are the cards that I have spec'd for this. Can anyone tell me if I am missing anything? Assume that there are protect cards for each and I know I do not have any OC3/OC12 cards for the OCn cross connects(We would add these later). I also know that I need the correct backplane cards for DS1 and DS3 handoff. 15454-OC48IR1310 1310nm OC48 cards 15454-DS3XM-6 6 port DS3 transmux cards 15454-DS1N-14 14 port DS1 cards 15454-TCC+ Timing and control cards 15454-XC-TV Cross connect cards 15454-FTA3 Any input on what I am missing or if there are better cards to use would be great. Thanks, -Troy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
