I noticed we're having a high number of TTL failures:
TTL failures : 24541591
So I implemented a HW rate-limiter as such:
mls rate-limit all ttl-failure 500 10
Two questions about this,
A) is there any way to find out how many packets are being 'rate-limited' due
to this command?
and
I am not aware of any, but would like to know too!
B) do I need to enable mls qos or anything else to 'globally enable' the HW
rate-limiter?
No. It's separate from QoS, you don't need QoS enabled for the MLS rate
limiters.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
