Hi all. My SCE8000 logs a lot of error messages: > 2009-11-01 00:56:15 | WARN | CPU #000 | System had started hardware > congestion bypassed
2009-11-01 01:22:17 | WARN | CPU #000 | System had stopped hardware > congestion bypassed 2009-11-01 01:22:23 | WARN | CPU #000 | System had started hardware > congestion bypassed 2009-10-01 08:26:37 | WARN | CPU #000 | The SE status changed to Warning 2009-10-01 12:26:37 | WARN | CPU #000 | SE Control Module: A problem > occurred. Please report to Cisco's customer support 2009-09-29 03:06:25 | ERROR | CPU #000 | Application configuration file > executed with 1363 errors. 2009-10-05 00:18:42 | ERROR | CPU #000 | SE Watchdog Module: An Error > occurred. Please report to Cisco's customer support 2009-10-05 00:18:42 | ERROR | CPU #000 | SE Watchdog Module: An Error > occurred. Please report to Cisco's customer support After these messages SCE can stop shaping, reboot, stop syncing subscribers etc. I could not find any explanation in documentation about such errors. Did anyone meet such problems? -- С уважением, Щедрин Михаил Начальник отдела ТП2 SkyNet Telecom http://sknt.ru Санкт-Петербург тел. +7 812 600-75-35 ext. 554 моб. +7 911 934-79-83 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
