Primoz, On Mon, Nov 16, 2009 at 11:56:17AM +0100, Primoz Jeroncic wrote: > test(config-ipv6-acl)#permit tcp any host xxxx:xxxx:0:3::2 eq 25 > % Host address xxxx:xxxx:0:3::2 can not be supported > % ACE can not be added > % Failed to add access list > > If I try to do same thing on c12008, it works without problems. > > Any idea how to solve this problem?
""" IPv6 ACL Limitations ... The switch supports most Cisco IOS-supported IPv6 ACLs with some exceptions: - IPv6 source and destination addresses—ACL matching is supported only on prefixes from /0 to /64 and host addresses (/128) that are in the extended universal identifier (EUI)-64 format. The switch supports only these host addresses with no loss of information: - aggregatable global unicast addresses - link local addresses """ http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_40_se/configuration/guide/swv6acl.html#wp4334642 Cheers, Tim
signature.asc
Description: Digital signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
