Hi, On Tue, Nov 17, 2009 at 01:20:58PM +0100, luismi wrote: > I wrote it in a previous email but here is again :D > > 7200 npe-g2 and 7600 rsp720-pfc3
These are very very *VERY* different platforms...
> I am using 12.2SRC but it is not supported there an I would like to know
> if it is supported in another train.
... so it might very well be supported on one of them, and not on the
other...
Just for the record - my assumption was wrong. I just tried to configure
BFD on a 6500 with SXF and SXH3a, and neither even permits me to enter
the bfd commands on the port-channel interfaces. Physical interfaces
only.
(Which makes some sort of sense, *iff* the BFD-handling is done in the
line card - where it belongs, to be independent of whatever load the
main CPU is having. OTOH, I don't think normal 6500 LAN cards are smart
enough to run BFD locally. So whatever...)
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpyYxKSxy8Gm.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
