Peter, Offtopic slightly but RAD make a whole range of IPmuxes to do exactly what you are after:
http://www.rad.com/3-2563/Pseudowire_Remote_Gateways/ Pat Thu, Nov 19, 2009 at 01:11:07PM +0100, Peter Rathlev wrote: > Hi everyone, > > We currently have a bunch of RAD FOM-E1/T1 modems. They work in pairs > converting E1 (entering via coax) to optical signaling carried via > single mode fiber to another modem that converts back to coax. > > Since we have practically no way of monitoring the RAD modems, and since > it seems wasteful to use a pair on SMF just for a 2048kbps signal we > would like instead to utilize some kind of "E1 over IP". > > Would anybody know how this can be achieved? We're thinking about Cisco > 2800 routers that could convert an incoming coax E1 signal to IP and > then route this over our core network. Does that make sense? I can't > seem to find any coax interfaces for the 2800, only RJ45 interfaces. Are > we out of luck on that one? > > And would anyone have any pointers to a "E1 over IP" basic configuration > we could look at? > > Thanks in advance. > > -- > Peter > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
