Group, I'm now testing the faulty fan tray. I confirm that only one Fan is stopped. What happens with a different IOS/SUP is a surprise:
00:12:27: %C4K_IOSMODPORTMAN-4-FANTRAYPARTIALFAILURE: A fan or thermistor/s in system fan tray have failed 00:13:57: %C4K_IOSMODPORTMAN-4-FANTRAYGOOD: Fan tray is okay 00:24:52: %C4K_IOSMODPORTMAN-4-FANTRAYPARTIALFAILURE: A fan or thermistor/s in system fan tray have failed 00:31:27: %C4K_IOSMODPORTMAN-4-FANTRAYGOOD: Fan tray is okay IOS=cat4500-ipbase-mz.122-31.SGA8.bin So on this IOS, the auto-shutdown "feature" is not available. I will now downgrade to "cat4000-i9s-mz.122-18.EW7.bin" to see if i'm able to replicate the problem. Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] -----Original Message----- From: Antonio Soares [mailto:[email protected]] Sent: sexta-feira, 20 de Novembro de 2009 10:19 To: '[email protected]' Subject: RE: Catalyst 4507R Single Point of Failure The Fan Tray (4597) was replaced and now everthing is fine. I will try to test the Faulty Fan Tray during the day and i will let you know what i found. Still looking for an answer to this question: - Is there any way to disable the system auto-shutdown ? Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] -----Original Message----- From: Antonio Soares [mailto:[email protected]] Sent: quinta-feira, 19 de Novembro de 2009 16:30 To: '[email protected]' Subject: RE: Catalyst 4507R Single Point of Failure More details about the system: IOS cat4000-i9s-mz.122-18.EW7.bin Dual Sup-IV (4515). We are going to replace the Fan Tray in about 2 hours. Then we will verify in the lab with more detail how many fans are failing. I'll keep you updated. But no matter how many Fans are faulty, i was expecting that, even if the entire Fan Tray fails, there was a way to override the system auto-shutdown. Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] -----Original Message----- From: Antonio Soares [mailto:[email protected]] Sent: quinta-feira, 19 de Novembro de 2009 13:49 To: '[email protected]' Subject: Catalyst 4507R Single Point of Failure Group, This is happening to a Catalyst 4507R: %C4K_IOSMODPORTMAN-4-FANTRAYBAD: Fan tray has failed %C4K_CHASSIS-2-INSUFFICIENTFANSDETECTED: Too few working fans in fan tray, the chassis will overheat. If not resolved, in 4 minutes all line cards will be placed into Reset-Mode %C4K_CHASSIS-2-INSUFFICIENTFANSSHUTDOWN: Resetting linecards due to fan tray failure %C4K_IOSMODPORTMAN-6-MODULEOFFLINE: Module 3 is offline %C4K_IOSMODPORTMAN-6-MODULEOFFLINE: Module 4 is offline %C4K_IOSMODPORTMAN-6-MODULEOFFLINE: Module 6 is offline %C4K_IOSMODPORTMAN-6-MODULEOFFLINE: Module 7 is offline %C4K_IOSMODPORTMAN-6-FANTRAYGOOD: Fan tray is okay I verified that only 1 out of 6 of the fans composing the Fan Tray is stopped. Any way to stop this automatic shutdown ? It's hard to understand why a Catalyst with Dual Supervisors and Dual Power Supplies will stop because of this. Thanks. Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
