Hi, I would approach this the indirect way - try shuffling the switches around to see which combinations work & which not. This is the "universal engineer" approach :)
-pavel skovajsa On Sun, Nov 22, 2009 at 11:17 PM, Daniele Orlandi <dani...@orlandi.com> wrote: > On Sunday 22 November 2009 18:28:07 Nick Hilliard wrote: >> >> If you disable autonegotiation, you will need to use a GE cross-over cable, > > I don't think so, because with GE there are no RX and TX pairs to be crossed > as all four pairs are both for transmission and reception. > > -- > Daniele "Vihai" Orlandi > Bieco Illuminista #184213 > _______________________________________________ > cisco-nsp mailing list cisco-...@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/