Thanks.
Never seen that in the command list of options, so never thought Cisco
could do it.
[email protected] wrote:
Hey,
Just do a show cable modem cpe_ip. It works on ubr72xxvxr and ubr10k.
------Original Message------
From: D.J. O'Berry
Sender: [email protected]
To: 'Cisco-nsp'
ReplyTo: [email protected]
Subject: [c-nsp] Identifying the modem based off of cpe ip
Sent: Nov 23, 2009 17:04
Hello all,
I'm writing in to ask this. I know that you can run a sho cable modem
(ip of modem) to look at a specific modem on a Cisco. What I'm looking
for is a way to show a modem based off of the cpe ip/mac behind it. I
know that older 3com and Terayon Bluewaves had this option in their code.
--
D.J. O'Berry
Network Design Engineer
ZCorum
866-467-9791 ext 7041
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
