hi justin thanks for the reply actually i figured out what was the issue it was due to entering 0 (unencrypted) or 7 (encrypted) :
> Date: Tue, 24 Nov 2009 17:11:17 -0600 > From: [email protected] > To: [email protected] > CC: [email protected]; [email protected] > Subject: Re: [c-nsp] Metro Ethernet Switches > > Bill Blackford wrote: > > I recall having some of my aaa config options slightly changing syntax > > after upgrading. Sounds like you've verified this, but it may be worth > > double-checking. > > I highly recommend using a tool like RANCID to keep an eye on config > changes, especially during upgrades. I didn't bother to check the > RANCID diff when I did an upgrade over the weekend and discovered a > problem yesterday (see NTP thread from yesterday). Had I stayed up and > reviewed the email notice I would have found the problem much sooner. > At the very least get a copy of Kiwi CatTools and run it before and > after an upgrade. It's a good sanity check. > > Justin > > > > _________________________________________________________________ Windows Live: Keep your friends up to date with what you do online. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
