Hi Jeff 2009/12/3 Jeff Kell <[email protected]>: > Can you determine the MSFC2 RAM size in a standby supervisor?
On my mix of Sup2/MSFC2s running 12.2(18)SXD7b and 12.2(18)SXF15a I have "remote command standby-rp sho ver" that does the trick. > All of the "remote command" options I've tried seem to be giving me the > PFC, not MSFC2; and any typical session/console to the standby sup of > course gives me the 'standby console disabled' message. IIRC "remote command mod 2 sho ver" (mod 1 active, mod 2 standby hot for SSO) gives me the standby SP RAM. > The active Sup2 was replaced awhile back and has a newer serial number, > apparently part of the "factory-supplied 512Mb" series. The standby is > older and not sure if it shipped with 256 or 512... Would rather not > failover at the moment to find out for certain... Definitely. Failover to satisfy curiosity on a production system is a bit far. The fact they're running in failover suggests their spec can't be too different or IOS *hopefully* would have moaned :) Cheers -- Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
