This is the document: http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12 .2SX/configuration/guide/qos.html
As you most likely want to apply a policy for a specific VLAN on a trunk, you should look at: http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12 .2SX/configuration/guide/qos.html#wp1726124 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Roman Serbski Sent: Thursday, December 10, 2009 10:54 To: [email protected] Subject: [c-nsp] Catalyst 6509 and 802.1p Hi list- Appreciate your guidance on the following question. We have two Catalyst 6509 interconnected over fiber with a number of VLANs shared between two switches. I setup another VLAN with two ports in total (one port on each switch) and would like to give the highest priority to traffic traversing between two ports. I searched archives for mls-qos and policy map but it seems that most responses are related to 35xx switches. Could someone advise me on documentation I should read in order to implement 802.1p on 65xx Catalyst switches? Thank you for your time. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
