It looks like we lost the ability to check OSPF neighbors via snmp in SRD?
See below
Host xx.xx.222.194 is running 12.2(33r)SRC3
Host xx.xx.208.1 was just upgraded to 12.2(33)SRD2a
(and both checks below really are checking neighbors that ARE in a full
state, verified from the CLI)
r...@tnwx-mntr-1:/usr/lib/nagios/plugins# ./check_ospf.0.1.pl -H
xx.xx.222.194 -C cacti -p xx.xx.205.3
OK - xx.xx.205.3 (Router ID 74.50.207.81) state is full(8)
r...@tnwx-mntr-1:/usr/lib/nagios/plugins# ./check_ospf.0.1.pl -H
xx.xx.208.1 -C cacti -p xx.xx.221.98
CRITICAL - xx.xx.221.98 is not in neighbor table.
r...@tnwx-mntr-1:/usr/lib/nagios/plugins#
I've asked the TAC about this, does anyone here know if this is a known
issue with SRD2a?
(Hardware is a 7600 with a SUP720-3b)
Worst case I'll schedule another day to downgrade to SRC3, but curious
if anyone here knows about this.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
