Asad, Yes, client initiated L2TP on the CPE router could do it if you want to have a PPP session and do normal PPP authentication on the BRAS. http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvoltun. html
Another option could be to just run a static GRE tunnel from the CPE to the "BRAS" (which in this case would not rally be a BRAS...) It really depends on what you want to achieve. Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Asad Sent: Wednesday, December 23, 2009 06:32 To: [email protected] Cc: [email protected] Subject: [c-nsp] PPPoE Requirement! Dear Friends! I have the following scenario. (Customer Cisco Router)------Ethernet-----[Routed CPE]-------RF Media---------(ISP Cisco Router)------Ethernet-------(ISP Cisco BRAS) My Requirement is to Dial PPPoE Connection from Customer Cisco Router. But because of Routed CPE(Bridging is not supported on CPE) presence i am unable to achieve that. Can someone suggest how is it possible?? I read somewhere that client initiated L2TP can be used for such scenarios, but i am not sure if it is the right solution?? Please help. Regards, Asad. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
