Dear Ryan i disabled routing on router 1 and router 5 to simulate them as hosts only and not to participate in the routing and r2 through the f0/0 interface can see the subnet to r1 through the directly connected interface am i right ??
> From: [email protected] > To: [email protected]; [email protected] > Subject: RE: [c-nsp] IPSEC VPN > Date: Thu, 24 Dec 2009 14:09:15 +0000 > > Mohammad, > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of Mohammad Khalil > > Sent: Thursday, December 24, 2009 7:55 AM > > > > i have the following topology > > router1 F0/0 --> F0/0 router2 S0/0 --> S0/0 router3 S0/1 --> s0/0 > > router4 F0/0 --> router5 F0/0 > > > > From your post, it's not clear if router1 has a default route pointing to > router2 and that router2 has a route back to the internal segment of router1. > Likewise from the perspective of router 4 and 5. > > -ryan _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
