http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_10.html#wp2269378
Although "C" doesn't seem to be there.
--
Tassos
[email protected] wrote on 03/01/2010 21:22:
Hi List,
i have some problems with understanding the output of "ping ipv6"
command and can't find any documentation on cisco website.
Ping in IPv4-mode uses these characters:
! Each exclamation point indicates receipt of a reply.
. Each period indicates the network server timed out while waiting
for a reply.
U A destination unreachable error PDU was received.
Q Source quench (destination too busy).
M Could not fragment.
? Unknown packet type.
& Packet lifetime exceeded
Can someone give me an overview of the ipv6 output characters or an
explanation of the following output?
ipv6#ping 2A00:1450:8001::6A size 900
Type escape sequence to abort.
Sending 5, 900-byte ICMP Echos to 2A00:1450:8001::6A, timeout is 2 seconds:
CCCCC
Success rate is 0 percent (0/5)
ipv6#ping 2A00:1450:8001::6A size 1600
Type escape sequence to abort.
Sending 5, 1600-byte ICMP Echos to 2A00:1450:8001::6A, timeout is 2
seconds:
AAAAA
Success rate is 0 percent (0/5)
ipv6#ping 2A00:1450:8001::6A size 100
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2A00:1450:8001::6A, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/20/20 ms
Thanks in advance...
Regards,
Alex
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
