Hi Arie, I mean, that if you've got a DSL-line with 160kbit upstream and you use it all.
The main thing I don't understand, is the error message "invalid destination". Do I understand it right, that the message I see in sh vpdn hist fail is send by the LAC to our LNS? Sebastian > -----Ursprüngliche Nachricht----- > Von: Arie Vayner (avayner) [mailto:[email protected]] > Gesendet: Dienstag, 5. Januar 2010 09:11 > An: Sebastian Ganschow; cisco-nsp > Betreff: RE: RE: [c-nsp] VPDN Problem > > Sebastian, > > What do you mean by "if you exceed your bandwidth"? > > You could try the following debugs for more info: > debug ppp nego > debug vpdn l2x event > debug vpdn l2x error > debug radius > > Arie > > -----Original Message----- > From: Sebastian Ganschow [mailto:[email protected]] > Sent: Tuesday, January 05, 2010 09:35 > To: Arie Vayner (avayner); cisco-nsp > Subject: AW: RE: [c-nsp] VPDN Problem > > Hi, > > Output of show vpdn history failure > > #sh vpdn history failure > User: xyz, MID = 902 > NAS: lac, IP address = 1.2.3.4, CLID = 63366 > Gateway: lns, IP address = 5.6.7.8, CLID = 1417 > Log time: Jan 4 10:55:24.390, Error repeat count: 3 > Failure type: The remote server closed this session > Failure reason: Result 2, Error 6 > > As I found out, the failure reason could be interpreted as the > following: > > Result 2 - General error (Error code indicates problem) > Error 2 - Invalid destination > > What is the meaning of invalid destination? As the tunnel is > established > and gets only dropped, if you exceed your bandwith, I can't get the > meaning of the error message from the context. > > Regards, > Sebastian > > > > -----Ursprüngliche Nachricht----- > > Von: Arie Vayner (avayner) [mailto:[email protected]] > > Gesendet: Mittwoch, 23. Dezember 2009 17:23 > > An: Sebastian Ganschow; [email protected] > > Betreff: RE: [c-nsp] VPDN Problem > > > > Sebastian, > > > > You can try looking at the output of "show vpdn history". > > I think the error you get means that the remote side requested a > > disconnect, but I also see some cases this appears by mistake... > > > > Arie > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Sebastian > > Ganschow > > Sent: Wednesday, December 23, 2009 12:17 > > To: [email protected] > > Subject: [c-nsp] VPDN Problem > > > > Hi all, > > > > we've got a little problem with our vpdn where we're stuck. Could > > anyone > > explain the following debugging messages from our 7206 to me: > > > > VPDN Vi12 disconnect (AAA) IETF: 8/port-error Ascend: 41/TCP Foreign > > Host Close > > VPDN Vi12 vpdn shutdown session, result=2, error=6, vendor_err=0, > > syslog_error_code=23, syslog_key_type=1 > > %VPDN-6-CLOSED: L2TP LNS viade-dbmg-lns closed Vi12 user username; > > Result > > 2, Error 6, Locally generated disconnect > > > > > > What is the meaning of: > > - 8/port-error Ascend: 41/TCP > > - Result 2, Error 6, Locally generated disconnect > > > > On CCO there is no information about those messages. > > > > The session gets disconnected, if the upstream bandwith is exceeded. > > There > > are two providers, who are delivering those vpdn sessions to us. > We've > > tried with users of them, but the disconnect only happens on our own > > LNS. > > If the user is connected two the LNS of one of the two providers, the > > session won't be disconnected. > > > > Any Ideas? > > > > Regards > > Sebastian > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
