So there's a few things that I see missing here. You need to have an IP that you will assign to the dial-in user. (Unless you intend to use this as a bridge, which I don't know if XP will support).
You should define some local pool of IP(s) that you will hand out. eg: ip local pool mypool 192.168.0.1 192.168.0.2 interface Group-Async1 ip unnumbered FastEthernet0/0 ip tcp header-compression passive ip pim border encapsulation ppp no ip mroute-cache async default routing async mode interactive peer default ip address pool mypool no fair-queue no cdp enable ppp max-bad-auth 3 ppp authentication pap chap group-range 1 This is taken from an old archive of configs that I have from doing dial in the good-old-days... Hope it helps. - Jared On Jan 5, 2010, at 4:16 AM, ioluz wrote: > Hello, > > I actually have problem with my cisco 2600 configuration. > > I have a cisco 2600 in a datacenter which is connected to a "Numeris" > connexion > > In my office , i have a windows xp computer which is able to use a "Numeris" > connexion. > > My goal is to be able to use the windows XP computer to connect to my cisco > 2600 by using our "Numeris" connexion" (in case of rescue) > > When i try to contatc my cisco by using my windows xp computer i get the > following error: > > *Mar 15 20:33:37.911: ISDN BR0/0 EVENT: service_queue_from_physical_layer: > Recvd L1 prim 1 state is 3 > *Mar 15 20:33:37.911: ISDN BR0/0 EVENT: isdn_sw_cstate: State = 4, Old State > = 4 > *Mar 15 20:33:37.915: ISDN BR0/0 EVENT: service_queue_from_physical_layer: > Recvd L1 prim 6 state is 1 > *Mar 15 20:33:37.923: ISDN BR0/0 Q921: User TX -> SABMEp sapi=0 tei=65 > *Mar 15 20:33:37.935: ISDN BR0/0 Q921: User RX <- UAf sapi=0 tei=65 > *Mar 15 20:33:37.935: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 65 > changed to up > *Mar 15 20:33:38.159: ISDN BR0/0 Q921: User RX <- UI sapi=0 tei=127 > *Mar 15 20:33:38.163: ISDN BR0/0 Q931: SETUP *censuré* = 8 callref = 0x66 > Bearer Capability i = 0x9090A3 > Standard = CCITT > Transfer Capability = 3.1kHz Audio > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0x89 > Progress Ind i = 0x8483 - Origination address is non-ISDN > Calling Party Number i = 0x2083, '*********' > Plan:Unknown, Type:National > Called Party Number i = 0x81, '****' > Plan:ISDN, Type:Unknown > Sending Complete > *Mar 15 20:33:38.167: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL > L2: sapi 0 tei 127 ces 0 ev 0x3 > *Mar 15 20:33:38.171: ISDN BR0/0 EVENT: process_rxstate: ces/callid 1/0x10A > calltype 2 HOST_INCOMING_CALL > *Mar 15 20:33:38.171: BR0/0:1: interface must be fifo queue, force fifo > *Mar 15 20:33:38.175: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di0 > *Mar 15 20:33:38.175: ISDN BR0/0 EVENT: UserIdle: callid 0x10A received > ACCEPT_CALL (0x13) > *Mar 15 20:33:38.179: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > up > *Mar 15 20:33:38.179: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected > to ********* N/A > *Mar 15 20:33:38.183: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=65, ns=0 > nr=0 > *Mar 15 20:33:38.187: ISDN BR0/0 Q931: CONNECT *censuré* = 8 callref = 0xE6 > Shift to Codeset 6 > Codeset 6 IE 0x24 i = 0x80 > *Mar 15 20:33:38.187: BR0/0:1 PPP: Using dialer call direction > *Mar 15 20:33:38.187: BR0/0:1 PPP: Treating connection as a callin > *Mar 15 20:33:38.187: BR0/0:1 PPP: Session handle[2F000076] Session id[106] > *Mar 15 20:33:38.187: BR0/0:1 PPP: Phase is ESTABLISHING, Passive Open > *Mar 15 20:33:38.187: BR0/0:1 LCP: State is Listen > *Mar 15 20:33:38.203: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=65 nr=1 > *Mar 15 20:33:38.255: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=65, ns=0 > nr=1 > *Mar 15 20:33:38.255: ISDN BR0/0 Q931: CONNECT_ACK *censuré* = 8 callref = > 0x66 > *Mar 15 20:33:38.259: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=65 nr=1 > *Mar 15 20:33:39.871: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=127 > *Mar 15 20:33:39.875: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL > L2: sapi 63 tei 127 ces 0 ev 0x3 > *Mar 15 20:33:39.879: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL > L2: sapi 63 tei 127 ces 0 ev 0x650 > *Mar 15 20:33:39.879: ISDN BR0/0 Q921: User TX -> IDCKRP ri=30551 ai=65 > *Mar 15 20:33:40.179: BR0/0:1 LCP: Timeout: State Listen > *Mar 15 20:33:40.179: BR0/0:1 PPP: Authorization required > *Mar 15 20:33:40.179: BR0/0:1 AAA/AUTHOR/LCP: Authorization succeeds > trivially > *Mar 15 20:33:40.183: BR0/0:1 LCP: O CONFREQ [Listen] id 3 len 15 > *Mar 15 20:33:40.183: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:40.183: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:42.187: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:42.187: BR0/0:1 LCP: O CONFREQ [REQsent] id 4 len 15 > *Mar 15 20:33:42.187: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:42.187: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:44.203: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:44.203: BR0/0:1 LCP: O CONFREQ [REQsent] id 5 len 15 > *Mar 15 20:33:44.203: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:44.203: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:46.219: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:46.219: BR0/0:1 LCP: O CONFREQ [REQsent] id 6 len 15 > *Mar 15 20:33:46.219: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:46.219: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:48.235: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:48.235: BR0/0:1 LCP: O CONFREQ [REQsent] id 7 len 15 > *Mar 15 20:33:48.235: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:48.235: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:48.259: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=1 > *Mar 15 20:33:48.271: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=1 > *Mar 15 20:33:50.251: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:50.251: BR0/0:1 LCP: O CONFREQ [REQsent] id 8 len 15 > *Mar 15 20:33:50.251: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:50.251: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:52.267: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:52.267: BR0/0:1 LCP: O CONFREQ [REQsent] id 9 len 15 > *Mar 15 20:33:52.267: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:52.267: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:54.283: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:54.283: BR0/0:1 LCP: O CONFREQ [REQsent] id 10 len 15 > *Mar 15 20:33:54.283: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:54.283: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:56.299: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:56.299: BR0/0:1 LCP: O CONFREQ [REQsent] id 11 len 15 > *Mar 15 20:33:56.299: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:56.299: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:33:58.271: ISDN BR0/0 Q921: User RX <- RRp sapi=0 tei=65 nr=1 > *Mar 15 20:33:58.275: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=1 > *Mar 15 20:33:58.275: ISDN BR0/0 Q921: User TX -> RRf sapi=0 tei=65 nr=1 > *Mar 15 20:33:58.287: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=1 > *Mar 15 20:33:58.315: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:33:58.315: BR0/0:1 LCP: O CONFREQ [REQsent] id 12 len 15 > *Mar 15 20:33:58.315: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > *Mar 15 20:33:58.315: BR0/0:1 LCP: MagicNumber 0x4FEE2E92 (0x05064FEE2E92) > *Mar 15 20:34:00.331: BR0/0:1 LCP: Timeout: State REQsent > *Mar 15 20:34:00.331: BR0/0:1 DDR: disconnecting call > *Mar 15 20:34:00.331: BR0/0:1 LCP: State is Listen > *Mar 15 20:34:00.331: ISDN BR0/0 EVENT: UserIdle: callid 0x10A received > ISDN_HANGUP (0x1) > *Mar 15 20:34:00.331: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected > from ********* , call lasted 22 seconds > *Mar 15 20:34:00.335: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=65, ns=1 > nr=1 > *Mar 15 20:34:00.339: ISDN BR0/0 Q931: DISCONNECT *censuré* = 8 callref = > 0xE6 > Cause i = 0x8790 - Normal call clearing > *Mar 15 20:34:00.355: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=65 nr=2 > *Mar 15 20:34:00.443: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=65, ns=1 > nr=2 > *Mar 15 20:34:00.443: ISDN BR0/0 Q931: RELEASE *censuré* = 8 callref = 0x66 > *Mar 15 20:34:00.447: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=65 nr=2 > *Mar 15 20:34:00.451: ISDN BR0/0 EVENT: process_rxstate: ces/callid 1/0x10A > calltype 1 HOST_DISCONNECT_ACK > *Mar 15 20:34:00.451: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > down > *Mar 15 20:34:00.451: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0 > *Mar 15 20:34:00.455: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from > profile Di0 > *Mar 15 20:34:00.459: ISDN BR0/0 EVENT: process_rxstate: ces/callid 1/0x10A > calltype 1 HOST_DISCONNECT_ACK > *Mar 15 20:34:00.459: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=65, ns=2 > nr=2 > *Mar 15 20:34:00.459: ISDN BR0/0 Q931: RELEASE_COMP *censuré* = 8 callref = > 0xE6 > Shift to Codeset 6 > Codeset 6 IE 0x24 i = 0x80 > *Mar 15 20:34:00.463: BR0/0:1 PPP: Sending Acct Event[Down] id[7C] > *Mar 15 20:34:00.463: BR0/0:1 LCP: State is Closed > *Mar 15 20:34:00.463: BR0/0:1 PPP: Phase is DOWN > *Mar 15 20:34:00.479: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=65 nr=3 > *Mar 15 20:34:04.479: ISDN BR0/0 Q921: User RX <- DISCp sapi=0 tei=65 > *Mar 15 20:34:04.479: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI > 65 changed to down > *Mar 15 20:34:04.483: ISDN BR0/0 Q921: User TX -> UAf sapi=0 tei=65 > *Mar 15 20:34:34.523: ISDN BR0/0 EVENT: service_queue_from_physical_layer: > Recvd L1 prim 5 state is 1 > *Mar 15 20:34:34.947: ISDN BR0/0 EVENT: service_queue_from_physical_layer: > Recvd L1 prim 3 state is 2 > *Mar 15 20:34:34.947: ISDN BR0/0 EVENT: isdn_sw_cstate: State = 0, Old State > = 4 > *Mar 15 20:34:34.951: ISDN BR0/0 Q931: L3_ShutDown: Shutting down ISDN Layer > 3 > > > here is my cisco's show run: > > Building configuration... > > Current configuration : 2191 bytes > ! > version 12.3 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname sw-adm.********** > ! > boot-start-marker > boot-end-marker > ! > enable secret 5 <secret> > ! > no aaa new-model > ip subnet-zero > ip cef > ! > ! > no ip domain lookup > ! > ip dhcp pool secret > network 10.1.76.0 255.255.255.240 > default-router 10.1.76.1 > ! > isdn switch-type vn3 > ! > username username privilege 0 secret 5 <secret> > username user privilege 0 secret 5 <secret> > username username2 password 0 <secret> > ! > ! > ! > ! > interface Loopback1 > ip address 172.16.1.1 255.255.255.0 > no ip mroute-cache > ! > interface FastEthernet0/0 > ip address 10.1.75.19 255.255.255.0 > no ip route-cache cef > no ip route-cache > duplex auto > speed auto > ! > interface BRI0/0 > no ip address > encapsulation ppp > dialer pool-member 1 > isdn switch-type vn3 > isdn incoming-voice data 64 > no peer default ip address > ppp authentication chap > ! > interface Serial0/0 > no ip address > ! > interface Dialer0 > ip address negotiated > encapsulation ppp > dialer pool 1 > dialer remote-name username2 > ! > no ip http server > ip classless > ! > ! > access-list 12 permit 10.1.75.20 > access-list 100 permit tcp host 10.1.75.20 any eq telnet log > access-list 100 deny ip any any log > dialer-list 1 protocol ip permit > banner login ^Cc > Good luck^C > ! > line con 0 > privilege level 0 > login local > line 33 64 > session-timeout 20 > exec-timeout 0 0 > no exec > transport input all > line aux 0 > session-timeout 20 > exec-timeout 0 0 > no exec > transport input all > line vty 0 4 > access-class 100 in > exec-timeout 0 0 > privilege level 0 > login local > transport input telnet > line vty 5 15 > login local > ! > ! > end > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
