Hi Guys, We have a number of Cisco 3550's doing QinQ on a Metro-E network.
I was wondering whether anybody is succesfully copying the 802.1P info from the Inner Tag, to the Outer Tag. From the following doc: http://www.cisco.mn/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/swtunnel.html The priority field on the metro tag is set to the interface class of service (CoS) priority configured on the tunnel port (the default is zero if none is configured). IEEE 802.1Q Tunneling and Other Features Although IEEE 802.1Q tunneling works well for Layer 2 packet switching, there are incompatibilities between some Layer 2 features and Layer 3 switching. •Tunnel ports do not support IP access control lists (ACLs). •Layer 3 quality of service (QoS) ACLs and other QoS features related to Layer 3 information are not supported on tunnel ports. MAC-based QoS is supported on tunnel ports. What does one need to support Layer-2 QoS on QinQ, newer Juniper EX switches? Cisco 3750's? Thanks, Rolf _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
