So I'm playing around with ipv6 on the ASA. I'm running the latest code
(8.2(1)). And in trying to get traceroutes and pings 'through' the ASA,
I've found that icmp-types are translated to 'english' but using the ipv4
codes. I.e. code 3 for ipv6 is time-exceeded but shows up in config as
unreachable (because unreachable == 3 in ipv4).
I'm guessing I should open a TAC case and complain ? You could call it a
cosmetic issue, but I see myself making mistakes because the burden is on
me to translate the icmp types as I enter config :(
--
Brandon Applegate - CCIE 10273
PGP Key fingerprint:
7407 DC86 AA7B A57F 62D1 A715 3C63 66A1 181E 6996
"SH1-0151. This is the serial number, of our orbital gun."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
