Hi Phil, We actually upgraded from SXF13 to SXF17 since this issue began so we have 'reloaded' it, we haven't completely powered it off and back on yet though.
thanks, -Drew -----Original Message----- From: Phil Mayers [mailto:[email protected]] Sent: Tuesday, January 12, 2010 11:40 AM To: Drew Weaver Cc: Cisco-nsp Subject: Re: [c-nsp] 6500 - FABRIC-SP-3-DISABLE_FAB > > Anyone have any thoughts as to what might be occurring here? We can > replace the card in slot 13 as well but we are concerned about the > exciting game of musical fabric errors the switch is playing. This might sound a bit odd, but you might see it go away with a reload. We've had funnies with fabric channels that were reliably reproducible, until we reloaded the box as a "last try" before RMAing - and it and all of its linecards have been fine since. Not the more reassuring statement I know. If you have a spare chassis you could try GOLDing the relevant cards one by one, using the disruptive tests (standard disclaimer: some of the disruptive tests fail if there's *ANY* config on the box at all; some fail under certain IOS versions; and so forth). If the cards all pass, it's probably fine :o/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
