Have you tried different baud rates? I have found some 35xx MCUs come from the factory set at 115200.
Jason -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of luismi Sent: Tuesday, January 12, 2010 10:21 AM To: [email protected] Subject: [c-nsp] IP/VC 3526 serial port is not showing anything Hi all, We take a Cisco IP/VC 3526 from one of our racks. We tried to access to it over the serial port with 9600 8N1 -as the documentation says- and it didn't work. We also have an alarm in the from but we were not able to find the relation with it in the documentation. As far as we read the product is EoL/EoS but it will have support until 2011 or 2012, so what is the natural alternative to replace it? Any comment is welcome, not neccesary should be Cisco. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ *** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. *** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
