Bob Arthurs wrote:
> hi all,
>
> I'm just about to install some HWIC-4ESW into our 3800s on some customer
> sites and I have a quick question - couldn't find a clear answer on cco.
>
> Can I configure the Ethernet ports on the HWIC-4ESW as routed ports (no
> switchport)? Or do I have to configure SVIs and then assign the ports to the
> SVI associated VLANs?
>
> I want to avoid the extra config with SVIs and keep it simple with routed
> ports if at all possible.
You will need to configure a VLAN access port, for which you can then
configure IP routing:
int fa0
switchport access vlan 2
int vlan 2
ip address ...
-garry
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
