Only BGP and Static are supported for 6VPE per Cisco. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Sridhar Sent: Tuesday, January 19, 2010 2:30 PM To: [email protected] Subject: [c-nsp] OSPFv3 as PE-CE protocol for 6VPE on IOS-XR ?
Hello! Is OSPFv3 supported as a PE-CE protocol for 6VPE on IOS-XR? The Cisco IOS-XR MPLS config guide only specifies BGP as the PE-CE protocol, and I haven't been able to configure a VRF under OSPFv3. thanks sridhar _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you are notified that reviewing, disseminating, disclosing, copying or distributing this e-mail is strictly prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any loss or damage caused by viruses or errors or omissions in the contents of this message, which arise as a result of e-mail transmission. [FriendFinder Networks, Inc., 220 Humbolt court, Sunnyvale, CA 94089, USA, FriendFinder.com _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
