Seth, I would say that the right approach for this would be to tune the logic of your NMS system to ignore these events, or make them low-priority events, and have a rule that alerts you about low-priority events only during work hours...
Another approach (but only relatively new IOS versions) would be to use the EEM SNMP Notification event detector. This would allow you to catch specific traps and block them on the router (or modify them to a different event). In older IOS versions the same can be accomplished for Syslog, so if you can turn off SNMP traps and use Syslog events, you can accomplish this on most IOS versions. The reference for the SNMP Notification EEM event detector is here: http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_06.html #wp1178594 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Seth Mattinen Sent: Tuesday, January 19, 2010 22:11 To: cisco-nsp Subject: [c-nsp] Disabling SNMP for certain BGP neighbors Is there any way to disable SNMP traps for a subset of BGP neighbors like there is for interfaces? I have a couple BGP sessions that are of "don't care" priority and they don't need to send traps when they flap (although rarely, it's always when I'm sleeping). ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
