I am running three VSSs on 's72033-advipservicesk9_wan-vz.122-33.SXI.bin' with an ACE and a FWSM.
'Time since CORP-CORE01 switched to active is 1 year, 9 weeks, 5 days, 19 hours, 46 minutes' Jason -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Holemans Wim Sent: Wednesday, January 27, 2010 8:02 AM To: [email protected] Subject: [c-nsp] best ios version for VSS We have a VSS running, L2 only for the moment. We plan to enable L3 (static routing only for the moment) next week (along with a FWSM board in each chassis). We are running version s72033-advipservicesk9_wan-mz.122-33.SXI1.bin for the moment (I know this version has too much features for what we need for the moment) The problems we had with this version until now : - One of the supervisors rebooted spontaneously leaving no traces on why it restarted - ISSU (I don't remember what the version was we started the upgrade) didn't work, so I had to boot both chassis manually, giving a much higher downtime than expected - The activation of the first FWSM (inserted with power down for that specific module, followed by power up of the module), caused a crash and reboot of the supervisor of the chassis in with the FWSM was inserted. So anyone has comments on to which version we eventually should upgrade to before going to L3 ? (downtime will have a much larger impact from that moment on). I found on the cisco website there is a version 12.2.33-SXH6(ED) and a version 12.2.33-SXI3(ED) available. Greetings, Wim Holemans Network Services University of Antwerp _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ *** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. *** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
