Whoops, no I didn't... LACP isn't a requirement (and is not configured on the foundry), so if I remove the LACP line and set the channel mode to 'on' instead of 'active' would that work? I could have sworn I had it working in the lab without LACP...
-- Randy ---------- Original Message ----------- From: Alan Buxey <[email protected]> To: Randy McAnally <[email protected]> Cc: "[email protected]" <[email protected]> Sent: Thu, 28 Jan 2010 21:38:11 +0000 Subject: Re: [c-nsp] port-channel help (warning, might be dumb) > Hi, > > > Foundry config: > > > > trunk ethe 1 to 2 > > trunk deploy > > foundry does LACP... did you do > > link-aggregate active > > on the foundry? > > alan ------- End of Original Message ------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
