What is the "right" way to combine IP layer 3 traffic so that it can go to multiple VLANs? I'm working with a Catalyst 65xx setup.
For example, I am starting from a working setup that looks something like this: interface GigabitEthernet4/1 speed auto switchport switchport access vlan 247 ! interface GigabitEthernet4/2 speed auto switchport switchport access vlan 248 ! interface Vlan247 ip address 192.168.247.1 255.255.255.0 ! interface Vlan248 ip address 192.168.248.1 255.255.255.0 Now, if I wanted to actually have a server 192.168.247.36 in Vlan247, but I want to make that server become a bridge so that I can give it other IP addresses in other blocks how would I do that? So let's say the *.247.36 IP of the server is working, but I want to change my setup so that the server also has 192.168.248.64/29 on it (i.e. I am busting up the .248. Netblock from a /24 to smaller blocks that will be on different servers). How would I go about doing this? Thanks, CJ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
