Hi Sony, There aren't any tools that I know of. I converted all of our SUP720's and SUP2's last summer using the directions here: http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
The process isn't as painful as it looks, just a little time consuming. Good Luck! Aaron ----------- Aaron Childs Assistant Director, Networking Westfield State College http://www.wsc.ma.edu/it/ ________________________________________ From: [email protected] [[email protected]] On Behalf Of Sony Scaria [[email protected]] Sent: Saturday, February 06, 2010 9:46 AM To: [email protected] Subject: [c-nsp] Hybrid to Native conversion Hi, I have an old 6500 with SUP2 and MSFC2. I Need to convert the configuration to IOS format. Is there any tool available which expedite the process than a manual conversion? Sony. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
