Can you please share following output: show fabric utilization
On Tue, Feb 9, 2010 at 3:22 PM, Andy B. <[email protected]> wrote: > On Tue, Feb 9, 2010 at 3:13 PM, Jon Lewis <[email protected]> wrote: > > > If all of that traffic is transiting between the 6748 and 6704s, is it > > possible you're filling (perhaps overfilling) the 40Gbps fabric the 6748 > has > > to the rest of the chassis during short traffic spikes? > > The 6748 is not really doing that much. Maybe 3-4 GBps. > > Incoming Transit and IBGP comes with one 6704. > The other 6704 is port-channeled into the VLAN > > > With that much going on, I'm surprised you're using a single 6509 vs > having > > things split between a pair or more of them. Put some transit and some > > customers on each...that way if one has an issue, needs a software > upgrade, > > etc., you can do a reload without the network going completely offline. > Or > > are you already doing that, and the troubled 6509 is just one of > multiple? > > This is already partially the case - I am working on improvements here > as well :) > > Andy > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
