Hello, It is just a config problem on your J CE1: You needn't flexible-vlan-tagging (nor flexible-ethernet-services encapsulation)
R/ Manu On Wed, Feb 17, 2010 at 5:01 PM, Ioan Branet <[email protected]> wrote: > Hello, > > I tried with Cisco 7600 as CE instead of Juniper and it works, I have to > find out what is wrong there. > > Thank you for your help, > Regards, > John > > ---------- Forwarded message ---------- > From: Ioan Branet <[email protected]> > Date: Wed, Feb 17, 2010 at 11:44 AM > Subject: Re: [c-nsp] EOMPLS between 10G subinterface and GE subinterface > between two 7600 > To: Tassos Chatzithomaoglou <[email protected]> > Cc: [email protected] > > > Hello, > > Maybe there is a bug with SRB IOS. > I still have VC up on both ends but I cant ping between CE1 and CE2. > > On CE1 (Juniper side) I learn arp address of remote CE2 device and receive > arp request and send arp reply: > > > show arp no-resolve | match xe-3/1/0 > 00:16:9c:6d:42:80 150.1.1.1 xe-3/1/0.999 none > > > Juniper PCAP Flags [Ext, In], PCAP Extension(s) total length 22 > Device Media Type Extension TLV #3, length 1, value: Ethernet (1) > Logical Interface Encapsulation Extension TLV #6, length 1, value: > Ethernet (14) > Device Interface Index Extension TLV #1, length 2, value: 193 > Logical Interface Index Extension TLV #4, length 4, value: 126 > Logical Unit Number Extension TLV #5, length 4, value: 32767 > -----original packet----- > 0:16:9c:6d:42:80 > Broadcast, ethertype 802.1Q (0x8100), length 64: > vlan 999, p 0, ethertype ARP, arp who-has 150.1.1.2 tell 150.1.1.1 > 11:34:01.878596 Out > Juniper PCAP Flags [Ext], PCAP Extension(s) total length 22 > Device Media Type Extension TLV #3, length 1, value: Ethernet (1) > Logical Interface Encapsulation Extension TLV #6, length 1, value: > Ethernet (14) > Device Interface Index Extension TLV #1, length 2, value: 193 > Logical Interface Index Extension TLV #4, length 4, value: 126 > Logical Unit Number Extension TLV #5, length 4, value: 32767 > -----original packet----- > 0:21:59:a7:c4:30 > 0:16:9c:6d:42:80, ethertype 802.1Q (0x8100), > length 46: vlan 999, p 0, ethertype ARP, arp reply 150.1.1.2 is-at > 0:21:59:a7:c4:30. > > The issue is that I can't upgrade to SRD IOS. > > thank you, > John > > > > On Wed, Feb 17, 2010 at 11:05 AM, Tassos Chatzithomaoglou < > [email protected]> wrote: > > > I'm running EoMPLS between 10GE subif and 1GE subif without any problem. > > > > 7600-a>sh mpls l2 vc 3601 > > > > Local intf Local circuit Dest address VC ID > Status > > ------------- -------------------------- --------------- ---------- > > ---------- > > Gi4/20.3601 Eth VLAN 3601 x.x.x.x 3601 UP > > > > > > 7600-b>sh mpls l2 vc 3601 > > > > Local intf Local circuit Dest address VC ID > Status > > ------------- -------------------------- --------------- ---------- > > ---------- > > Te3/2.3601 Eth VLAN 3601 x.x.x.x 3601 UP > > > > > > Both 7600s are running SRD3. > > > > -- > > Tassos > > > > Ioan Branet wrote on 17/02/2010 10:49: > > > >> Hello, > >> > >> We run EOMPLS on port and vlan mode on GE interfaces but we did not run > >> EOMPLS Vlan mode between 10G and 1G subinterfaces until now. > >> > >> Any feedback is appreciated. > >> Thank you, > >> John > >> > >> On Wed, Feb 17, 2010 at 10:43 AM, Mikael Abrahamsson <[email protected] > >> >wrote: > >> > >> > >> > >>> On Wed, 17 Feb 2010, Ioan Branet wrote: > >>> > >>> You should answer to the list, answering just to me doesn't make much > >>> sense. > >>> > >>> SRB4 is buggy, stop running it. Try latest SRB (SRB6 or 7, I don't > >>> remember), or go SRD3 or later. > >>> > >>> > >>> Hello, > >>> > >>> > >>>> We are running on both PEs the following: > >>>> sh ver | i IOS > >>>> Cisco IOS Software, c7600s72033_rp Software > >>>> (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB4, RELEASE > >>>> SOFTWARE > >>>> (fc3) > >>>> > >>>> 10G card on PE1 is: > >>>> show module 7 > >>>> Mod Ports Card Type Model > >>>> Serial > >>>> No. > >>>> --- ----- -------------------------------------- ------------------ > >>>> ----------- > >>>> 7 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE > >>>> SAL1337YN4W > >>>> > >>>> and 1G on PE2 is: > >>>> > >>>> > >>>> ro-sv01a-rd2#show module 2 > >>>> Mod Ports Card Type Model > >>>> Serial > >>>> No. > >>>> --- ----- -------------------------------------- ------------------ > >>>> ----------- > >>>> 2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP > >>>> SAL1005CBXG > >>>> > >>>> Mod MAC addresses Hw Fw Sw > >>>> Status > >>>> --- ---------------------------------- ------ ------------ > ------------ > >>>> ------- > >>>> 2 0016.c8c4.fc10 to 0016.c8c4.fc27 2.3 12.2(14r)S5 12.2(33)SRB4 > >>>> Ok > >>>> > >>>> Mod Sub-Module Model Serial Hw > >>>> Status > >>>> ---- --------------------------- ------------------ ----------- > ------- > >>>> ------- > >>>> 2 Centralized Forwarding Card WS-F6700-CFC SAL1014J60S 2.0 > >>>> Ok > >>>> > >>>> Mod Online Diag Status > >>>> ---- ------------------- > >>>> 2 Pass > >>>> > >>>> Thank you, > >>>> John > >>>> > >>>> On Wed, Feb 17, 2010 at 10:27 AM, Mikael Abrahamsson < > [email protected] > >>>> > >>>> > >>>>> wrote: > >>>>> > >>>>> > >>>> On Wed, 17 Feb 2010, Ioan Branet wrote: > >>>> > >>>> > >>>>> GE interface between two 7600 as PE. > >>>>> > >>>>> > >>>>> > >>>>>> > >>>>>> > >>>>> You forgot to include what software you're running. > >>>>> > >>>>> -- > >>>>> Mikael Abrahamsson email: [email protected] > >>>>> > >>>>> > >>>>> > >>>>> > >>>> -- > >>> Mikael Abrahamsson email: [email protected] > >>> > >>> > >>> > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >> > >> > >> > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
