Philip, Take a look here: http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xi/feature/guide/123X IQoS.html
You can download a policy-map profile name from RADIUS for PPP sessions. The policy-map in your case could only have a class-default class with a single action to police the traffic to the correct rate. Note that you need to pre-configure the different policy-maps according to the different rates you want to use for your customer profiles... Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Philip Davis Sent: Thursday, February 18, 2010 19:06 To: cisco-nsp Subject: [c-nsp] CIR with Radius on PPP interfaces Hello, Is there a way to policing/cir/sla on a virtual PPP interface via radius, or am I asking the wrong question? I'm trying to set service levels on an LNS where the access layer doesn't support radius provisioning. Should I try to do this, or should service level always be dictated at the access level? Thanks, Phil -- Philip Davis Systems Administrator I-2000 Inc. (616) 532-8425 888-234-4254 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
