Thanks Tim.... whew! ;) Actually, I was misreading the bandwidth statement itself - missed a zero earlier so thought you could only set it to 1 Gig, now I realized you can set it up to 10GE. Updated it to 2Gig and everything good now..
Much appreciated, Paul -----Original Message----- From: Tim Stevenson [mailto:[email protected]] Sent: February-22-10 8:12 PM To: Paul Stewart; [email protected] Subject: Re: [c-nsp] 6500 SVI Question Hi Paul, The bandwidth does not affect the throughput etc and doesn't take into account the underlying L2 interfaces bandwidth. It strictly for use by the routing protocols to determine metrics (and can be modified using the "bandwidth" interface command). Also you can change the reference b/w using "ospf auto-cost reference-bandwidth" under the "router ospf" process. Hope that helps, Tim At 04:56 PM 2/22/2010, Paul Stewart mumbled: >Hi there... > > > >Typically when we require higher bandwidth, we upgrade the interface to >something larger ... recently though we were faced with having to do 2XGE on >a LAG until our new 10GE ports arrive. The SVI interface shows a bandwidth >of 1 Gig even though there are two physical GigE interfaces "connected" to >it.... will there be any issues doing more than a Gig on this SVI interface? >This is the first time amazingly that I've run across this ;) > > > >The card where the two GigE's come into is a 6148A-GE-TX and the ports are >at opposite ends of the physical card... > > > >Thanks, appreciate it as always... > > > >Paul > > > > > > > >_______________________________________________ >cisco-nsp mailing list [email protected] ><https://puck.nether.net/mailman/listinfo/cisco-nsp>https://puck.nether.net /mailman/listinfo/cisco-nsp >archive at ><http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/piperma il/cisco-nsp/ Tim Stevenson, [email protected] Routing & Switching CCIE #5561 Technical Marketing Engineer, Cisco Nexus 7000 Cisco - http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
