I'm using LAM (Local Area Mobility) for a similar scenario. You may want
to have a look at it.
It's pretty damn simple to setup; just 3 commands)
--
Tassos
Anthony McGarry wrote on 23/02/2010 12:38:
Thanks for the input but I'm not to worried about which BRAS the
client logs into, the one that responds first would be fine.
What I really need to know is how to assign static IPs to clients if
they log into either BRAS when both BRASs have a different network
range on their loopbacks.
Although this feature would give more granularity, maybe cisco will
add this feature to the 7300 in a later release.
Anthony
coredump wrote:
You can try use PADO Delay attributes but that features IMHO is only
available is the 12.2(33)SB terrain in Cisco 10k routers.
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_sss.html
/Rizal
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
