Hey Roland, You mean if the provider can figure out where the traffic is coming from right?
Haven't had too much luck with that so far. thanks, -Drew -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dobbins, Roland Sent: Thursday, February 25, 2010 7:28 PM To: Cisco-nsp Subject: Re: [c-nsp] Netflow - GSR engine 5 On Feb 26, 2010, at 12:43 AM, Drew Weaver wrote: > but why is it showing up in the netflow exports? Because that's how NetFlow is supposed to work on a real router, vs. the broken implementation on 6500/7600 with current hardware. ;> It's of great operational significance to know that even though you're dropping traffic on your side of a link via uRPF, S/RTBH, ACLs, whatever, said traffic is still pummeling your router. You can then work with your peer/upstream/downstream/customer to get the traffic squelched closer to the actual source(s). ----------------------------------------------------------------------- Roland Dobbins <[email protected]> // <http://www.arbornetworks.com> Injustice is relatively easy to bear; what stings is justice. -- H.L. Mencken _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
