Hello Vijay, > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of vijay gore > Sent: Tuesday, March 02, 2010 12:53 AM > Dear Tem, > > provide the solution, line protocol frequently up & Down, > > > *Mar 1 06:18:16.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet6, changed state to down > *Mar 1 06:18:16.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet5, changed state to down > *Mar 1 06:18:16.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet4, changed state to down > *Mar 1 06:18:16.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet3, changed state to down > *Mar 1 06:18:16.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet2, changed state to down > *Mar 1 06:18:24.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface > Tunnel***, changed state to up > *Mar 2 05:17:21.210: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthernet0, changed state to down > *Mar 2 05:17:23.634: %TUN-5-RECURDOWN: Tunnel*** temporarily disabled > due > to recursive routing
This means the route to the tunnel destination is routing through the tunnel. If you are running a routing protocol over the tunnel, you either need to prune the tunnel source/destination from the advertised networks, or static route the /32 destination out the real egress interface to override your routing protocol. HTH, Cory _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
