Global scope, I'm working on a lab and assigned 2201::/64, the side with problems side is 2201::2 and the other 2201::1
Anyway, I have tried to setup the "neighbor" command with different global IPv6 addresses and I'm always having the same result. Thanks Leah. On Thu, Mar 4, 2010 at 4:55 PM, Leah Lynch (Contractor) <[email protected]> wrote: > What address scope are you using? > > Leah > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tomas Lynch > Sent: Thursday, March 04, 2010 11:40 AM > To: [email protected] > Subject: [c-nsp] BGP IPV6 strange message > > I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and > c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is > there (e.g. ipv6 cef) but BGP keeps telling me: > > 7200(config)#router bgp $ASN1 > 7200(config-router)#neigh X::X remote-as $ASN2 > % Link local peer outside address-family scope > 7200(config-router)#address-family ipv6 unicast > % BGP: Error initializing topology > > I can ping to the neighbor X::X from X::(X+1). The routers are > connected using gigabit ports. > > I have google the errors but there is nothing. Anybody else had this > problem before? > > -tl > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
