This message prints every time this router boots that I am about to deploy. The Ethernet is for Metro Ethernet, a PtP VLAN between 2 locations across Qwest's QMOE cloud. Config looks like this:
! interface GigabitEthernet0/0/0 description QMOE service no ip address negotiation auto ! interface GigabitEthernet0/0/0.1 description PtP VLAN to XXX encapsulation dot1Q 10 ip address XXX.XXXXXX.8 255.255.255.254 ip access-group XXX out no cdp enable service-policy output QMOE-SHAPE Can I get away with a /31, to save some IP space, or do I need a /30 ? -- James H. Edwards Senior Network Systems Administrator Judicial Information Division [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
