I've seen similar behavior when spanning a vlan that runs across a 10gb
port/port-channel to a 1Gb interface (e.g., monitor session 1 source
vlan 10, monitor session 1 destination int gi1/1).
Albert Goerend wrote:
On Wed, Mar 10, 2010 at 10:49 PM, Jared Mauch <[email protected]> wrote:
What about drops here?
Router#show plat hard cap interface
#show plat hard cap interface
Interface Resources
Interface drops:
Module Total drops: Tx Rx Highest drop port: Tx Rx
2 267800331 43 13 23
8 0 113207396 0 3
9 0 83 0 1
Interface buffer sizes:
Module Bytes: Tx buffer Rx buffer
2 (asic-1) 1221120 152000
8 (asic-1) 14622592 1914304
9 (asic-1) 14622592 1914304
- Albert
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
