If you are monitoring the incoming interface counters via SNMP, you are going to see the "before rate-limiting" rate. The packets are still getting to the interface, but are being dropped if they exceed the CAR configuration.
On Thu, Mar 11, 2010 at 10:05 AM, Khetan Sewpaul <[email protected]> wrote: > > Hi, > > I have issue with CAR, I have a rate-limit statement on a sub-interface. > The output rate-limit command matches, and "rates" packets towards my > customer, but incoming packets are not being limited. The sub-Interface > is a Gigabit Ethernet, on a Cisco 7204 VXR NPE-400. When I do a show int > gig x/x rate-limit, I can see stats for the incoming limiting. However, > stats show that the client is not being limited, using SNMP (Cacti) > > Your help is appreciated > > --k > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
