> -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Primoz Jeroncic > Sent: Wednesday, March 17, 2010 1:14 AM > To: Cisco Mailing list > Subject: [c-nsp] disabling Env. monitor reports on c12008 > > Hi guys > > I have c12008 with 2 power supplies, from which one is turned off and > is > in the box only as backup which could be switched on manually if > something > would go wrong with primary one. Now I'm getting whole bunch of errors > in > log that volts level with this power supply has reached critical level > (which is perfectly normal if it's switched off). > Does anyone have idea, how to disable this check (just for slot 24, not > globally, since I would still like to get warnings about other slots), > so > my logs wouldn't be full of crap like this (one every 15mins): > > Mar 17 08:55:52: %ENV_MON-2-VOLTAGE: Card 5v supply(slot 24) volts has > reached CRITICAL level at 0 m(V) > > Thanks for help. > >From (config)# hw-module slot 24 shutdown
Just make sure you have the right slot. :-) Mike _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
