You may check Cisco's site, I remember having this issue, and I had to upgrade IOS, Catos, or rommon. I cant remember what exactly had to be upgraded, because it was a few years ago.
Leah -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Larry Stites Sent: Wednesday, March 17, 2010 12:03 PM To: [email protected] Subject: [c-nsp] Cisco 6509 SUP2-MSFC2 and PCMCIA Flash Is it possible that 128mb is too large amount of flash memory for the S2-MSFC2 to recognize? Does the Supervisor module only accommodate 64Mb max? We're having trouble with (MEM-C6K-ATA-1-128M) PCMCIA 128MB memory cards for the S2-MSFC2. No matter which of (4) S2-MSFC2 we put the memory cards in we get: %Error opening slot0:/ (No device available) which is the same error as if nothing is in that slot. (We tried disk0: as well) Is there something needed to be done to these to make the MEM-C6K-ATA-1-128M usable/recognizable with these S2's? Thanks ~.~ Best regards, Larry E. Stites Northern California Networks, Inc. Nevada City, Calif. 95959 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
