If two routers are injecting a default route under OSPF then each router will retain their own default route in the route table as each other's injected default route has the same distance as its self advertised default. You could set a higher/lower distance on inbound advertisements from the neighbors to influence the installation of the default route into the RIB.
HTH -kevin -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Granzer Sent: Thursday, March 18, 2010 09:13 To: [email protected] Subject: [c-nsp] OSPF Default Route Injection Hello, please could someone explain what exactly command "default-information originate always" under ospf process works ? When you have more than one router configured with this default route injection is correct behavior that you don't see on these routers default route in their ip routing table from other routers and you see only external lsa for 0.0.0.0 in ospf database ? Thanks, David _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
