---------------------------------------------------------------------- Jon Lewis | I route Senior Network Engineer | therefore you are Atlantic Net | _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
I have a 7206vxr running c7200-js-mz.123-23 doing a mix of T1 aggregation
and PPPoA/PPPoE DSL termination. Lately, we've been seeing an issue with
one particular PPPoE DSL user. They have a static IP and a /30 via
their RADIUS profile. When this user disconnects, the per-user static
route for their subnet isn't getting cleared from the routing table.
Their static /32 does get cleared. The only way I've found to clear the
/30 is to enter the route into the config, and then remove it from the
config. With an uptime of 2.5 years, I should probably just upgrade to
12.3(26) and reboot...but I wonder if anyone else has seen this?
- [c-nsp] per-user static routes getting stuck Jon Lewis
- Re: [c-nsp] per-user static routes getting stuck Anton Kapela
- Re: [c-nsp] per-user static routes getting stuck Jess Kitchen
