Roy, The router would already have a session in the NAT translation table so it would know which global IP to use.
Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Roy Sent: Sunday, April 04, 2010 21:39 To: [email protected] Subject: [c-nsp] Using NAT with servers and dual ISP I have a customer with a connection to two ISPs and NAT. I have outbound traffic working just fine with NAT route-maps and PBR My consfusin is handling inbound connections to the customer servers. I can define inbound static mappings but how do the packets that the server sends in response make it way through the router and avoid going out the wrong interface. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
