Hi guys, Here is what I came up with based on what you all told me yesterday. Does this look correct for routing both tagged and untagged VLANS (one of each shown here) to the Linux host?
I really appreciate the pointers on this. Since the software isn¹t working right on the Linux side and the vendor is calling me today it would be awesome if I knew I had the right configuration in the Catalyst so we don¹t have to ³point² and blame that. Thanks, CJ interface Port-channel32 switchport switchport trunk encapsulation dot1q switchport trunk native vlan 309 switchport trunk allowed vlan 309,999-1001 switchport mode trunk switchport nonegotiate ! interface GigabitEthernet4/32 description One of the 3 identical bonded LACP GigE interfaces load-interval 30 speed 1000 duplex full switchport switchport trunk native vlan 309 switchport trunk allowed vlan 309,999-1001 switchport mode trunk switchport nonegotiate channel-group 32 mode active channel-protocol lacp ! interface Vlan309 description /27 for NATIVE (untagged) VLAN ip address 10.1.1.1 255.255.255.224 load-interval 30 ! interface Vlan1001 description One of the TAGGED VLANs ip address 192.168.101.1 255.255.255.0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
