what is the bandwidth utilization on each interface. overrun is due to buffer has no space. On Tue, 2010-04-06 at 11:44 +0300, Mohammad Khalil wrote: > hi all > > i have 2 cisco 7606 routers connected to ASN GW for wimax traffic > we had a problem with overruns on the port channels > we connected 5 cables from the ASN to both routers and configured port > channels for VLAN and the same setup for another vlan > one vlan is for communcations with RASs and one to transport the traffic for > into the core cloud > anyway we upgraded the IOS version on the routers thinking thats might solve > the issue but still > please find below > > CR1.KJ-Building#sh int po10 | inc over > 1 input errors, 1 CRC, 0 frame, 72395 overrun, 0 ignored > CR1.KJ-Building#sh int po20 | inc over > 6 input errors, 2 CRC, 0 frame, 734930 overrun, 0 ignored > > CR1.KJ-Building#sh run int po10 > Building configuration... > > Current configuration : 259 bytes > ! > interface Port-channel10 > description CORE_VLAN to ASN Gateway > switchport > switchport access vlan 10 > switchport trunk encapsulation dot1q > switchport mode access > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > end > > CR1.KJ-Building#sh run int po20 > Building configuration... > > Current configuration : 258 bytes > ! > interface Port-channel20 > description RAS-VLAN to ASN Gateway > switchport > switchport access vlan 20 > switchport trunk encapsulation dot1q > switchport mode access > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > end > > CR2.KJ-Building#sh int po10 | inc over > 0 input errors, 0 CRC, 0 frame, 17889 overrun, 0 ignored > CR2.KJ-Building#sh int po20 | inc over > 0 input errors, 0 CRC, 0 frame, 826604 overrun, 0 ignored > > CR2.KJ-Building#sh run int po10 > Building configuration... > > Current configuration : 259 bytes > ! > interface Port-channel10 > description CORE_VLAN to ASN Gateway > switchport > switchport access vlan 10 > switchport trunk encapsulation dot1q > switchport mode access > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > end > > CR2.KJ-Building#sh run int po20 > Building configuration... > > Current configuration : 258 bytes > ! > interface Port-channel20 > description RAS-VLAN to ASN Gateway > switchport > switchport access vlan 20 > switchport trunk encapsulation dot1q > switchport mode access > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > end > > any advice in regards > thanks > > _________________________________________________________________ > Hotmail: Powerful Free email with security by Microsoft. > https://signup.live.com/signup.aspx?id=60969 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
-- Kamlesh Sharma <[email protected]> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
